Core2 for AWS is the reference hardware kit for AWS IoT Kit – a prescriptive learning program from AWS which makes it easy and cost effective to learn how to build IoT applications using AWS services. It comes equipped with a Microchip ATECC608 Trust&GO pre-provisioned secure element, in addition to the existing features of the standard M5Stack Core2 and M5GO Bottom2. The Core2 for AWS is a feature rich, plug and play extensible, and secure hardware kit for learning and building a wide range of IoT applications.
To learn more about the Core2 for AWS IoT Kit program, visit https://core2-for-aws-docs.m5stack.com.
The Core2 for AWS comes with an ESP32-D0WDQ6-V3 micro controller, which features dual Xtensa 32-bit LX6 cores and a main frequency up to 240Mhz, with 2.4GHz Wi-Fi. Comes with 8MB PSRAM and 16MB flash on board.
The main unit is equipped with a 2.0-inch capacitive touch screen that provides a smooth and responsive human machine interface. The built-in vibration motor can be used to provide haptic feedback or alerts. Onboard RTC module provides accurate time of day. Power is supplied through an AXP192 power management chip, to monitor and control power attributes of the device. The included TF card slot supports microSD cards up to 16GB. The on-board speaker is paired with an I2S digital audio interface power amplifier chip to reduce signal distortion and provide clearer audio output. There are independent physical power and reset (RST) buttons on the sides of Core2 for AWS, with 3 programmable touch buttons on the front of the screen.
The M5GO Bottom2 for AWS adds additional features and security for IoT applications. The MPU6886 provides 6-axis internal IMU and temperature, the SPM1423 digital microphone captures audio for recording or creating voice applications, 10 individually programmable RGB LEDs via SK6812 to create customized and animated light effects, a 500mAh lithium-ion battery provides power on the go, the onboard Microchip ATECC608 Trust&GO crypto-authentication chip is pre-provisioned with secure keys to simplify connectivity to AWS and accelerate cryptographic computation.The CP2104 chip interface is reserved on the PCB of Core2 for AWS to interface with the lithium battery.
For all questions or issue regarding this device, pls visit our forum: https://forum.m5stack.com/category/41/core2-for-aws
Power on: One click the power button on the left
Power off: Long press the left power button for 6 seconds
Reset: Click the RST button on the bottom side
The vibration sensor of M5Core2 and M5 Base series are incompatible in mechanical design. Please do not stack them together.
Some of the screen edges will have touch non-linearity problem, you can try to use M5Tool to upgrade the screen firmware to solve this problem.
- Reference hardware kit for use with AWS IoT Kit
- ESP32-D0WDQ6-V3, supports 2.4GHz Wi-Fi
- 16M Flash, 8M PSRAM
- Built-in ATECC608 hardware encryption chip
- Capacitive touch screen
- Built-in PDM microphone, power indicator, 6-Axis IMU, vibration motor, I2S codec, Amplifier, Speaker, RTC, power button, reset button, 10 x RGB LEDs
- TF card slot (support up to 16GB)
- Built-in 500mAh Lithium ion battery, equipped with power management chip
- Validated through AWS Device Qualification Program
- Compatible with multi-platform development:
- 1x M5Stack Core2
- 1x M5GO Bottom2 for AWS
- 1x Type-C USB (50cm)
- 1x HEX KEY
- Internet of Things Controller
- STEM Education
- DIY projects
|ESP32-D0WDQ6-V3||240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi|
|Hardware encryption chip||ATECC608B-TNGTLSU-G (addr 0x35)|
|Input voltage||5V @ 500mA|
|Host interface||TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1|
|Programmable LED light||SK6812*10|
|Button||Power button, RST button, virtual screen button * 3|
|Vibration reminder||Vibration motor|
|IPS LCD screen||2.0"@320*240 ILI9342C|
|Capacitive touch screen IC||FT6336U|
|I2S power amplifier||NS4168|
|TF card slot||Support up to 16G|
|Lithium battery||500mAh @ 3.7V|
|Antenna||2.4G 3D antenna|
|Working temperature||32°F to 104°F (0°C to 40°C )|
|Product size||54 x 54 x 24mm|
|Package size||90 x 60 x 27mm|
|Shell material||Plastic (PC )|
LEARN AND DOCUMENTS
I like it, many thanks
If you're looking for a development kit for AWS IoT EduKit, I would highly recommend the M5Stack Core2 ESP32! It's a great little kit that's perfect for getting started with IoT development. The Core2 is really easy to use and comes with everything you need to get started. Plus, the AWS IoT EduKit integration makes it easy to connect to the AWS cloud.
M5Stack’s Core2 is easily the best IOT development device in the marketplace. Compared to others I other devices I have used including RPi products, stand-alone ESP dev boards and Arduino. The Core2 comes with everything from easy to use software to a good txt to a vibration motor. The Grove system for sensors makes things accessible to a wide range of users and tinkerers. Can’t say enough good things about this device. The only thing I would love to see in the future is a larger screen version maybe 5”+. Great work so far M5 stack!
M5Stack Core2 ESP32 IoT Development Kit for AWS IoT EduKit