- PRODUCT DETAILS
This product is EOL now, we've released the updated version M5Stack FIRE IoT Development Kit (PSRAM) V2.6) which is fully compatible with this product.
M5Stack FIRE Kit, as one of the M5Stack developing kit series, is an upgrade from the Gray kits. Providing 9-Axis IMU sensor(6-Axis posture acceleration measurement + 3-Axis magnetic measurement), it equips with more hardware resources : 16M Flash + 8M PSRAM , enhanced Base (M5GO Base and M5GO CHG Base), larger battery, etc. For those developers who ask for hardware performance, Fire will be a good choice.
With a IMU posture sensor, there are a lot of situations which you can apply this kit to: detecting acceleration, angulation, and trajectory. You can make relative products like sports data collector, 3D remote gesture controller and more base on the above functions.
FIRE is M5 Core device. Its modular, stackable, scalable, and portable device is powered with an ESP-32 core, which makes it open source, low cost, full-function, and easy for developers to handle new product development on all stages include circuit design, PCB design, software, mold design and production.
M5Stack Fire comes with three separable parts. The top part ,just like Basic and Gray Kit, has all kinds of processors, chips ,sockets, 2.4G antenna, ESP32, power management IC , a LCD screen and some other interface components. The middle part is called M5GO base which provides a lithium battery, M-BUS socket , LED bar and three more GROVE Ports. The bottom part is a charge table, which can be connected to the M5GO base via POGO pins.
Supportive development platforms and programming languages: Arduino, Blockly language with UIFlow , Micropython. Regardless of what level programming skill you have, M5Stack would guide you in every step of the way to realize your idea as well as to the final productlization.
If you ever played with ESP8266, you would realize that ESP32 is a perfect upgrade out of ESP8266. In comparison, ESP32 has more GPIOs, more analog inputs and two analog outputs, multiple extra peripherals( like a spare UART ). Official developing platform ESP-IDF has transplanted with FreeRTOS. With dual-core and real time OS you can get more organized code and much high speed processor.
The GPIO 16 / 17 in Fire is connected to the PSRAM by default, so when you connect or stack other function modules, you need to avoid conflicts with these two pins to prevent the device from working improperly and causing instability.
Power on: click the red power button on the left
Power off: Quickly double-click the red power button on the left
Note: By default, when USB is powered, it cannot be shut down**
- Speaker, 3 Buttons, LCD(320*240)
- TF card slot (16G Maximum size)
- Battery Socket & Lipo Battery
- Extendable Pins & Holes
- M-Bus Socket & Pins
- Development Platform UIFlow , MicroPython , Arduino
- 1x FIRE
- 1x M5GO CHG Base
- 2x LEGO block
- 5x LEGO connector
- 1x M3 HEX KEY
- 1x Type-C USB(100cm)
- 1x User Manual
- Internet of things terminal controller
- Stem education product
- DIY creation
|ESP32||240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth|
|Power Input||5V @ 500mA|
|Port||TypeC x 1, GROVE(I2C+I/0+UART) x 1|
|IPS Screen||2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit|
|Button||Custom button x 3|
|MEMS||BMM150 + MPU6886|
|Battery||500 mAh @ 3.7V|
|Antenna||2.4G 3D Antenna|
|Operating Temperature||0°C to 60°C|
|Product Size||54mm x 54mm x 30.5mm|
|Package Size||105mm x 65mm x 40mm|
|Case Material||Plastic ( PC )|
LEARN AND DOCUMENTS
It very good, I would like to see the new touch with battery dock as well, great work
Thanks, fast shipping and corresponding material.
It is a amazing design, well thought
M5Stack FIRE IoT Development Kit (PSRAM 2.0)
Funciona a la perfección. Lástima que no pueda decir lo mismo del kit pm2.5