ExtPort For Core2 is an expansion module for
M5Stack Core2 converting to
Grove interface. It provides
PortB/C/D/E 4 Grove interfaces, and
PortD/E can be configured with different GPIOs via internal dip switches.
1. ExtPort For Core2 has the signature of designer.
2.Before use, please switch one of the 3-pin dip switch to be
ON. Remember that, only one of the dip switch can be set to ON, or it may damage the module.
3.If you need to use the Core2 bottom board, you will need to cut off the four support feet of the PROTO module (as shown below), to avoid interference with the bottom board, and use M3 screws to fix.
- 4x Grove interface (PortB/C/D/E)
- 4x 3-pin dip switches (PortD/E)
- 1x 5Pin@2.54mm pin head
- 1x ExtPort For Core2
- Multi-sensor, multi-actuator extensions
- DIY project
|Expansion ports||PortB, PortC, PortD, PortE|