PRODUCT DETAILS
Description
M5Stack FIRE It‘ a cost-effective Wi-Fi IoT controller adopts Espressif ESP32 main control chip, equipped with two low-power Xtensa® 32-bit LX6 microprocessors, with main frequency up to 240MHz. With 8M PSRAM + 16M FLASH memory, 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot and other peripherals. The full-coverage case ensures circuit stability even in complex industrial applications. The internal offers a wide range of common interface resources (ADC/DAC/I2C/UART/SPI, etc.) which is highly expandable. This functional and powerful IoT controller is very applicable to various product prototyping, industrial control and smart building applications.
-
High productization.- Exquisite designs, Prototyping right into products
- Product-grade full-coverage cover for more stable circuit operation
-
Low code development:- Support UIFlow graphical programming platform, scripting-free, cloud push
- Fully compatible with Arduino, ESP32-IDF and other mainstream development platforms
- Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.
-
High integration.- 2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3
- Built-in Li-ion power, integrated power management chip, supports TypeC and POGO PIN
- finely tuned RF circuit for stable and reliable wireless communication
-
Strong expandability.- GROVE expansion ports x3 (I2C, GPIO, UART)
- Easy access to M5Stack software and hardware system, stackable module design, plug-and-play sensor expansion
Note:
GPIO 16 / 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability..
Switching operations:
Power on:Click the red button on the left
Power off: Quickly double-click the red button on the left
USB power: By default, It can not be shutdown when USB power is on.
Product Features
- Based on ESP32 development
- 8M PSRAM + 16M FLASH memory combination
- Integrated HD IPS display panel with various hardware peripherals
- Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
- Adopt M5GO BOTTOM base compatible with 8mm size LEGO blocks, the structure is full of fun to build.
- Microsoft Azure authentication device
- Compatible with multi-platform development:
Included
- 1x M5Stack FIRE
- 1x M5GO Charging Base
- 2x LEGO Building Blocks
- 5x LEGO Connections
- 1x M3 Hex Wrench
- 1x Type-C USB (50cm)
- 1x User's Manual
Applications
- IoT Controller
- DIY creator works
- Smart Home Control
Specifications
| Specifications | Parameters |
|---|---|
| ESP32-D0WDQ6-V3 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi |
| Flash | 16MB |
| PSRAM | 8MB |
| Input power | 5V @ 500mA |
| Interface | TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1 |
| Keys | Custom Keys x 3 |
| LCD screen | 2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit |
| Speaker | 1W-0928 |
| Microphone | Analog BSE3729 Microphone |
| IMU | 6-axis MPU6886 |
| USB Chip | CH9102F |
| LED | SK6812 RGB LED x 10 |
| Antenna | 2.4G 3D antenna |
| Battery - 500 mAh @ 3.7V | |
| Operating Temperature | 0°C to 40°C |
| Net Weight | 62.3g |
| Gross Weight | 162g |
| Product Dimensions | 54mm x 54mm x 30.5mm |
| Package Size | 105mm x 65mm x 40mm |
| Cover Material | Plastic ( PC ) |
LEARN AND DOCUMENTS
This tutorial will show you how to control FIRE devices through the UIFlow graphical programming platform
This tutorial will show you how to program and control FIRE devices through Arduino IDE
This tutorial will show you how to control FIRE devices through Micropython programming
Modern times make modern solutions possible. Therefore, the step to a digital snow globe is not that far.
We aim to build a robot that is effective in sanitizing surfaces without putting cleaners in harm's way.
An IoT office assistant with "free, busy and lunch" indicators, Pomodoro timers and quick meetings with IFTTT and your calendar integration.
An audio spectrum visualizer using the M5Stack internal mic or FC-04 sound sensor with the M5Stack core. Translated from a guide by macsbug
M5Stack recently released an updated LoRaWAN module. This tutorial teaches you how to connect it to The Things Network using UIFlow.
Out of the M5Stack family only the M5StickC has an inbuilt RTC. Here's how to add one to your other M5Stack devices
Simple setup of a Seeed Studio Grove ultrasonic sensor (not HC-SR04) in Arduino.
An FM radio (RDA5807) powered by UIFlow. 📻
A DIY project conduct with a thermal printer and M5Camera.
A minimal library book management system emulation program.
After I recently discovered how to play WAV files on the M5Stack, I thought it would be perfect to make a flashcard system.
This is an example based on TensorFlow gesture recognition.
This allows the display to be rotated to 0, 90, 180, and 270 degrees at any time with no added overhead.
Controlling DJI Tello drone with gestures via the M5Stack FIRE module and Edge Impulse.
Gate/door fingerprint security system with body temperature checks for the anti-COVID measure.
The PID Control Learning Platform is based on an M5Stack Fire & BaseX with TOF and Accel Units, and some Lego NXT parts.
The model will help learn / associate the items/phrases commonly used by a user (autistic/semi-verbal); so that they can communicate.
We aim to build a robot that is effective in sanitizing surfaces without putting cleaners in harm's way.
We have devised with an innovation that dispenses hand sanitizer, measures the temperature of user, shows the count of people in vicinity.
This year's Christmas, I decorated the tree with M5Stack devices.
Hand Hygienics aims to reduce spread of Covid-19 through contact.
Control a DJI Tello drone via Telegram from anywhere in the world
![SEAM [Safe-Entry Access Machine]](https://hackster.imgix.net/uploads/attachments/1255277/_zELd2Tpa8J.blob?auto=compress%2Cformat&w=400&h=300&fit=min)
An automatic system to perform the tasks of Safe Entry. It consist an adjustable Thermometer, RFID / QR Code Check in and Counting.