M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3
RISC-V MCU with
Wi-Fi connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption, while also make it optimal for industrial IoT equipment collecting sensor data within a factory or a building.
The Stamp-C3 is based on
32-bit RISC-V micro controller and operates at a maximum clock frequency of
160 MHz. With 400 KB of internal RAM and
4 MB Flash, it can facilitate many different use-cases involving connected devices. Furthermore, the exceptional heat resistance plastic enclosure is sustained at a higher operating temperature.
Note: If you need to use SPIFFS filesystem in Arduino IDE. Please install a patch package first.
- Three types soldering options are available(SMT, DIP, fly wire), with a high-temperature resistant plastic enclosure, Peak temperature = 230℃
- Stamp-C3 contains 5V->3.3V DC/DC design, GPIOx13, programmable RGB LED x1, Reset button x1, button x1, 3D antenna,providing stable and reliable wireless communication.
- Stamp-C3 fully compatible with Arduino, ESP32-IDF, and other mainstream development platforms to quickly build various applications. (UIFlow support coming soon)
- DIY Prototyping
- Home Appliances
- Industrial Automation
|ESP32-C3||32bit RISC-V single-core processor, clocked at 160 MHz|
|Storage||384KB ROM, 400KB SRAM, 8KB RTC SRAM, 4MB FLASH|
|Wi-Fi||2.4 GHz band supports 20 MHz and 40 MHz bandwidth, IEEE 802.11 b/g/n protocol, data rate up to 150 Mbps|
|Input voltage||5V @ 500mA|
|HMI||Programmable physical button x 1, reset debugging button x 1, programmable RGB LED (SK6812) x 1|
|USB interface||TypeC x1|
|Antenna Type||2.4G 3D Antenna|
|Module peripheral interface resources||ADC, GPIO, SPI, UART, I2C, I2S, PWM, RMT, DMA, USB serial port, TWAI|
|IO interface x13||G21, G20, G9, G18, G19, G1, G0, G10, G8, G7, G6, G5, G4|
|IO interface spacing||2.54mm|
|Fixing screw specifications||M2*4 countersunk head hexagon socket mechanical teeth|
|Product size||34 * 20 * 4.6mm|
|Packing size||85*55mm sealing bag (translucent)|
LEARN AND DOCUMENTS
M5Stamp C3 Mate with Pin Headers
Cute little device with many possibilities. Works as it should. Delivery on time as usual.